Do+Able Products 12347 Uživatelský manuál stáhnout pdf (Strana 43)

Hardware Management Console Best Practices

- 43 -

File Name Location on Media Directory to copy to

disk1.img Media 1: base/ /home/hmc/images/

disk2.img Media 1: images/ /home/hmc/images/

disk3.img Media 2: images/ /home/hmc/images/

7.8 Startup the HMC Using the Network

Once the server is setup, follow the steps below to start the HMC using the

network adapter as the startup device. If the HMC is currently running, you must

first shut down and restart it by using the command hmcshutdown or by exiting

the console.

When the HMC restarts, and the following options will be displayed:

Press F1 for Setup

Press F12 for Startup Device

Press F12 key, and select the network adapter. This will be the integrated Ethernet

adapter on your HMC.

If F12 option is not displayed:

• Press F1, and then specify the network interface as one of the startup devices

via the BIOS Setup utility, as follows:

1. From BIOS Setup, find and select Startup or Start Options, and

then Startup Sequence to view the list of startup devices.

2. Depending on the type of HMC (desktop or rack-mount), use the

+/- key or arrow key to make the network interface an entry in the

startup list, after the hard disk.

3. If the HMC is a desktop, find and enable the Start-up Device Menu

prompt. This action allows you to press the F12 key when the

HMC powers on, and then select the network device in your

startup list.

4. For the CR2 or CR3 machine type, the Planar Ethernet PXE/DHCP

entry should have Planar Ethernet 1 and Planar Ethernet 2. On

desktop HMC machines, press the Esc key, and then select Devices

-> Network Setup. Make sure that both PXE Boot Agent and PXE

Base code are set to Enabled. Network installation does not occur

if these two settings are not enabled.

5. When you have finished, save the settings, then exit the BIOS

setup utility to restart the boot process. At this point, you can press

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 56 57

Žádné komentáře

Do+Able Products 12347 Uživatelský manuál Strana 43